Search
Log In

Mold, Bank Sinker, 4 Cavity, 3 oz.

By A Mystery Man Writer

Sinker Size; 3 oz.

Do-it Bank Sinker Mold 4oz 3cavity

DO-IT BANK SINKER MOLD 4 oz ONLY

The Do-It Walleye Jig Mold with Barb guarantees no flash or trimming. Pour in the lead and take out perfect castings every time. The wood handles make bulky gloves unnecessary. Each mold is machined and the halves are perfectly matched. Molds are properly pinned to give perfect alignment. Unless otherwise specified, hook style recommendations are for Eagle Claw Aberdeen jig hooks.

Do-it Walleye Jig Mold with Barb

Adygil Fishing Egg Sinker Mold Kits 1oz 2oz 3oz 4oz 5oz 5 Cavities

Casts size of weight on sinker Made in the USA

Do It Mold Bank Sinker Multi Cavity 1/8, 1/4, 3/8, 1/2, 3/4, 7/8, 1, 1 1/2 Oz Banks Sinkers Do it Mold 1101 BK-8-A

The flat low profile does not drift with the current so your line stays in place. A CP332 Core Pin for each cavity is included. Core pins can be stripped away immediately in the mould or later after the extracted parts have cooled. Extra CP332 parts are available to increase moulding speed.

Do-it No-Roll Sinker Mold

For Size 6 and 8 Ounce Sinkers.

Do-It Bank Sinker Mold Assorted Sinker Sizes

Adygil Fishing No Roll Sinker Mold Kits 1oz 1.5oz 2oz 3oz 4 Cavities

Do It Mold Bank Sinker Single Cavity Sz: 12 oz : Sports & Outdoors

Mold Bank Sinker 4 Cavity 3 oz

Bank Sinker - Multi Cavity - Sz: 2, 3, 4, 5

Do-It Molds Split Shot Sinker Mold Removable with 20 Cavities and 1/32, 1/16, 3/32, and 1/8-Ounce : Fishing Hooks : Sports & Outdoors

Has eight cavities in 3/8, 1/2, 3/4 and 1 ounce sizes. It is missing the side pins. Expect minor evidence of use or imperfections, dings etc. from

Reading Instrument Bank Sinker Mold 8-Cavity 3/8 to 1 Ounce Oz Fishing Weight

Do-it Molds Bank Sinker Mold - Multi Cavity

Bank Sinker Mould With 3 Cavities and 4.5.6-Ounce How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into saucepan and heat until molten (lead will normally melt at 650 degrees). Once lead is molten use a cooking spoon to take away any impurities that have risen to the top. 4.

Dimatteo Bank Sinker Mold with 3 Cavities and 4.5.6-Ounce,Without Handle